Описание
Описание товараCatalyst 3560 на 48 портов Ethernet 10/100/1000 с поддержкой питания устройств по витой паре (PoE) и 4 порта SFP. Версия ПО IPS Image.DescriptionSpecificationPerformanceForwarding bandwidth32 GbpsDRAM128 MBFLASH32 MBForwarding rate:38.7 Mpps• Configurable up to 12,000 MAC addresses• Configurable up to 11,000 unicast routes• Configurable up to 1000 IGMP groups and multicast routesConnectors and Cabling• 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling• 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive)• 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling• 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive)• 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling• 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling• 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimodefiber)• Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cmPower Connectors• Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 2300. The connectors are located at the back of the switch.• Internal-Power-Supply Connector• The internal power supply is an autoranging unit.• The internal power supply supports input voltages between 100 and 240 VAC.• Use the supplied AC power cord to connect the AC power connector to an AC power outlet.• Cisco RPS Connector• The connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.• The connector supports up to six external network devices and provides power totwo failed devices at a time.• The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of netwo
Описание товараCatalyst 3560 на 48 портов Ethernet 10/100/1000 с поддержкой питания устройств по витой паре (PoE) и 4 порта SFP. Версия ПО IPS Image.DescriptionSpecificationPerformanceForwarding bandwidth32 GbpsDRAM128 MBFLASH32 MBForwarding rate:38.7 Mpps• Configurable up to 12,000 MAC addresses• Configurable up to 11,000 unicast routes• Configurable up to 1000 IGMP groups and multicast routesConnectors and Cabling• 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling• 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive)• 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling• 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive)• 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling• 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling• 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimodefiber)• Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cmPower Connectors• Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 2300. The connectors are located at the back of the switch.• Internal-Power-Supply Connector• The internal power supply is an autoranging unit.• The internal power supply supports input voltages between 100 and 240 VAC.• Use the supplied AC power cord to connect the AC power connector to an AC power outlet.• Cisco RPS Connector• The connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.• The connector supports up to six external network devices and provides power totwo failed devices at a time.• The connector automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of netwo0 557446557446RUB557446RUB
